Major Science Mini Wide Vertical Gel Electrophoresis Apparatus, MV-10WDSYS


Mini Wide Vertical Gel Electrophoresis Apparatus, MV-10WDSYS

Mini Wide Vertical Electrophoresis System (MV-10WDSYS) with a gel width of 20cm effectively doubles the number of samples that can be resolved when compared to the Mini Vertical Electrophoresis System. This allows consistency of sample comparison on a single gel and is designed for those with greater than 20 samples to compare and resolve. Simple set up using ultra soft silicone seals guarantees trouble free glass plate loading and gel casting. Dual gaskets on the gel running insert along with notched and plain glass plates ensure leak proof gel running. Rapid set up cooling retains resolution in extended separations and also saves buffer volume without affecting run quality. 4mm thick glass plates reduce breakage and have bonded spaces for added convenience. A wide range of accessories are available to allow for many techniques to be performed using the same unit. Prep combs can be used to maximize sample loading and recovery.


  • Offers the capacity of two mini gels on a single gel
  • Rapid gel casting and loading
  • Low buffer consumption
  • Run up to 4 gels at one time
  • Great indications for gel making and running
  • Ice cooling pack
  • Easy gel casting and no gel leakage
  • Competitive pricing

This product is offered as a complete system for the user to cast, and run electrophoresis. It including:

  • 1 x Electrophoresis tank & lid & inner running module
  • 1 x MV-10WNG (200x100mm notched glass plates, 2mm thick, pk/2)
  • 1 x MV-10WPGS1 (200x100mm plain glass plates with 1mm bonded spacers, pk/2)
  • 1 x MV-10WDP (dummy plate)
  • 2 x MV-20-24-1 (24sample combs, 1mm thick)
  • 1 x MV-20DCAST (200x100mm casting base )
  • 1 x MV-20ICB (mini cooling pack)
  • 1 x MS-DAG-GT01 (sillcone water repellent spray 5ml)
  • 1 x Black & red electrophoresis cable


Cat. No.


Dimension (WxLxH)

Approx. 10.2″x6.3″x6.3″ (260x160x160mm)

Plate Dimension (WxL)

Approx. 7.9″x3.9″ (200x100mm)

Gel Dimension (WxL)

Approx. 7.1″x3.2″ (180x80mm)

Maximum Sample

192 samples, 48 samples per gel

Buffer Volume

0.16gal – 0.74gal (600 – 2800ml)

Ice Cooling Pack


Dummy Plate And Casting Base


Electrical Safety

Lid can be fastened in only one way


Upon lid removal, power is disconnected from buffer chamber

Rapid Casting Gel

Use gel maker stand