FastPette™ Pro Pipette Controller, SKU P2002
Lightweight, ergonomically shaped pipette controller designed for convenience.
The new FASTPETTE™ PRO- Lightweight and ergonomically shaped motorized pipette controller designed for work with glass or plastic serological pipettes from 0.5 to 100 ml range. Conveniently positioned switches allow choosing different operation modes and speed depending on the volume of the serological pipette and liquid viscosity. Additionally aspirating and dispensing speed is controlled through two comfortable finger triggers.
When fully charged, the NiMH batteries enable up to eight hours of continuous use. The large LCD display the serological high viscosity faspette indicates the battery status along with the pipetting mode and speed selected. In order to protect the device against overfilling the FASTPETTE™ PRO is equipped with a 0.2 um PTFE filter. The filter, the pipette holder and the nosepiece are autoclavable. The FASTPETTE™ PRO is also supplied with a universal battery charger, an additional hydrophobic 0.2 µm filter and a two-position charging stand.
|0.48lbs / 0.22kg
|Battery charging time
|Nose piece, pipette holder & filter
|Glass or plastic, 1 to 100mL
|120 – 240V
FastPette™ V2 Pipette Controllers, SKU P2000
Lightweight and ergonomic design makes the V2 a perfect choice!
This revolutionary battery powered pipette controller works with glass and plastic pipettes in the 1 to 100 ml range. The FastPette™ was designed with the user in mind. It has a lightweight handle with smooth push-buttons and ergonomically located switches.
- Works with pipettes from 1 ml to 100 ml
- High aspiration speed – 25 ml in 4 seconds
- Cordless work for up to 8 continuous hours
- Ergonomically designed
The aspiration speed can be set to high or low to adjust for the volume of the pipette and viscosity of the liquid. The suction can also be adjusted by the amount of pressure applied to the trigger button. Dispensing can be carried out by gravity or supported by the pump, which empties the pipette with a blow out step. The FastPette™ is protected from the entrance of liquids by both a PTFE filter and a safety valve. To protect samples from cross contamination, both the filter and pipette holder are easily exchanged and autoclaved. When fully charged, the FastPette™ can be used continuously for eight hours. When the low battery light is lit, the unit should be recharged. Should the charge run out while working with the pipette, simply attach the power supply and continue to use. The battery is protected against over charging by timing and thermal systems. The FastPette™ is supplied with the power supply/charger and PTFE filter.
|2,000 pipetting cycles
|Battery charging time
|11 – 14 hours
|Nosepiece, pipette holder and filter
|Glass or plastic, 1 to 100 ml
|230V~, 50 Hz or 120V~, 60 Hz